The Stanley 8 has been in continuous production in one form or another from the 1940’s right up to the present day and is the most successful range cooker in Irish history. Several factors contribute towards this success but the most important is versatility.
Once reconditioned by H&F, this modest sized heating cooker offers a choice of five different boilers as well as a cooking only version and comes in solid fuel, pressure jet or vaporising burner options. You can also select between enamelled or Bakelite door handles and there are options for a pate rack and splash back.
The solid fuel model is a multi-fuel appliance and can be fired from either the front or top on some models. The vaporising burner offers near silent operation whilst the pressure jet model allows for the convenience of a timer and thermostatic temperature controls.
We offer a full installation service, however the price may vary depending on any additional preparation work required such as for the chimney or plumbing.
- Burns all types of dry solid fuel
- Robust cast iron construction
- Oven temperature indicator
- Large surface hotplates
- Domestic hot water and central heating models available
- Non boiler model available
A. Height 720mm
B. Width 907mm
C. Depth 555mm
D. Depth to bracket 610mm
E. Flue 5” (125mm) rear centred: H560mm x 395mm from RH edge of hob. Top connection option
F. Boiler flow pipe 1” BSP rear connection, centred: H870mm x 140mm from LH edge of hob
G. Boiler return pipe 1” BSP rear connection, centred: H465mm x 140mm from LH edge of hob
H. Hotplate W555mm x L295mm boiling side LH
I. Oven W390mm x H330mm x D400mm
J. Fuel: multi-fuel: wood, coal & turf. Oil conversion available ; pressure jet 28 second kerosene
K. Firebox dimensions (maximum, non-boiler): W330mm x H340mm x D340mm
L. Height to top of splash back panel: 1228mm
Heat Output to Water:
DHW boiler 2.9kW
L boiler 4.4kW up to 4 radiators
U8 boiler 6.2kW up to 6 radiators
U9 boiler 13.76kW up to 8 radiators
Notes: There is no hotplate cover option for this cooker. Plate rack is a cost option
Due to the nature of the casting process all dimensions are subject to slight +/- variations
To view our enamel colours: