H&F can now offer a fully Electric Aga in either of our reconditioned Standard or Deluxe models. Imagine the wonderful cooking ability and cosy radiant room heat of a classic Aga cooker coupled with the convenience of timer control and a temperature adjustment knob. No more worrying about running out of oil or weather you have loaded enough anthracite to last until you return home because the Electric Aga is connected to your mains electricity supply via a 13A fused spur.
An Electric Aga uses a clean and silent power source; no more ashes to remove or flue ways to clean and neither the timer nor the element makes any sound what so ever. All components have been manufactured and tested to be robust and durable, which means no servicing is required, further reducing running costs.
Because there is no combustion of any type of fuel, the Electric Aga needs no flue or chimney connection, only a one inch vent pipe to remove cooking smells from the ovens. This means you have a lot more flexibility when choosing a location for your cooker and designing your kitchen layout.
Installation is simplified too, as this appliance runs off a 13 amp fused spur rather than a heavy-duty supply. The controls are simple and easy to use; the timer is set just like a central heating control unit allowing a fine degree of cycle control with on-off intervals as low as every 15 minutes. The thermostat on the H&F Electric Aga is adjusted by a rotary knob with a numbered dial so that it is easy to see what setting you have selected. The control box can be conveniently located at waist height or higher so that you don't have to kneel down to adjust the temperature.
We import the Electric Aga conversion unit from the UK and all kits are designed, produced and constructed in England and conform to both UK electrical regulations and carry the CE mark making them suitable for the Irish market.
We offer a full installation service; however the price may vary depending on any additional preparation work required such as for the chimney or plumbing.
- Timer controlled on/off cycle
- Thermostat for temperature adjustment
- Simple, easy to use controls
- No flue required
- No annual service required
- Increased hot spot temperature
- Requires only a simple 13amp fused spur
- British designed and manufactured
- 2 or 4 oven models available
- Clean and silent operation
- Optional Climote controller
Click here to find out more about the Climote Controller
Specifications - Two Oven Model
A. Height 850mm
B. Width 987mm
C. Depth 679mm
D. Depth to bracket 756mm
E. Flue 4” (100mm) rear centred: H889mm x 467mm from RH edge. Top connection option available
F. Boiler flow pipe 1” BSP centred: H626mm x 53mm from back edge*
H. Boiler return pipe 1” BSP centred: H499mm x 53mm from back edge*
I. Roasting oven W365mm x H265mm x D500mm
J. Baking oven W365mm x H265mm x D500mm
K. Boiling hotplate 300mm diameter circle
L. Simmering hotplate 345mm diameter circle
M. Fuel: solid fuel (anthracite only), gas LPG, Natural Gas, oil (28 second kerosene) vaporising burner and 13 amp electric
*Boiler pipes position can be on RH side or from the top on some models, please ask for details.
Maximum weight: 480Kg
Heat output to room from: From 4.2Kw
Specifications - Four Oven Model
Maximum weight: 635Kg
Selection of 2 ring gas & electric hobs available for the top of the extension cabinet to replace the standard issue warming plate
These appliance are shipped in kit form and must be assembled on site
They cannot be used to heat radiators
There is no solid fuel option for Standard model
Electric models cannot have a boiler fitted
Due to the nature of the casting process all dimensions are subject to slight +/- variations
To view our enamel colours: